Commit 6d3c3558 authored by Linus Nordberg's avatar Linus Nordberg

Split README into README and THANKS.

Rewrite AUTHORS.
parent ac0608ea
Stig Venaas <venaas@uninett.no> Radsecproxy was written by Stig Venaas <stig@venaas.com>.
Radsecproxy is currently being maintained by Linus Nordberg
<linus@nordu.net>.
The following people have contributed to Radsecproxy in one way or
another:
Kolbjørn Barmen
Simon Leinen
Linus Nordberg
Ralf Paffrath
Arne Schwabe
Andreas Solberg
Milan Sova
Stig Venaas
Stefan Winter
Maja Wolniewicz
Hans Zandbelt
This is radsecproxy 1.4.1 from June 11 2010. This is radsecproxy 1.4.1 from June 11 2010.
radsecproxy is a generic RADIUS proxy that can support various radsecproxy is a generic RADIUS proxy that can support various RADIUS
RADIUS clients over UDP or TLS (RadSec). clients over UDP or TLS (RadSec).
It should build on most Linux and BSD platforms by simply typing It should build on most Linux and BSD platforms by simply typing
"make". You may also try to use autoconf. It is possible to "./configure && make". It is possible to specify which RADIUS
specify which RADIUS transport the build should support. With transport the build should support. Without any special options to
just doing "make" one will support only UDP and TLS. See the configure, all transports supported by the system will be enabled.
Makefile for how to change this. With autoconf (configure) there See the output from "configure --help" for how to change this.
will normally be support for all transport. You can use the
configure options --enable-udp, --enable-tcp, --enable-tls and To use radsecproxy you need to create a config file which normally is
--enable-dtls where each of them may be set to yes or no to called "/etc/radsecproxy.conf". You can also specify the location
enable or disable them. with the "-c" command line option (see below). For further
To use it you need to create a config file which normally is
called "/etc/radsecproxy.conf". You can also specify the location
with the "-c" command line option (see below). For further
instructions, please see the enclosed example file and the instructions, please see the enclosed example file and the
documentation at documentation at
http://software.uninett.no/radsecproxy/?page=documentation http://software.uninett.no/radsecproxy/?page=documentation
There are five options that may be specified on the command line. There are five options that may be specified on the command line:
"-c configfile" to specify a non-default config file path; "-c configfile" to specify a non-default config file path.
"-d loglevel" to set a loglevel of 1, 2, 3, 4 and 5 where 5 is the "-d loglevel" to set a loglevel of 1, 2, 3, 4 and 5 where 5 is the
most detailed; and "-f" to run the proxy in the foreground with logging most detailed.
to stderr. Without "-f" the default is to detach as a daemon and "-f" to run the proxy in the foreground with logging to stderr.
log to syslog. "-v" just prints version information and exits, while Without "-f" the default is to detach as a daemon and log to
syslog.
"-v" just prints version information and exits.
"-p" (pretend) makes the proxy go through the configuration files as "-p" (pretend) makes the proxy go through the configuration files as
normal, but stops before creating any sockets or doing any serious normal, but stops before creating any sockets or doing any
work. This is useful for validating config files. serious work. This is useful for validating config files.
Thanks to Stefan Winter and Andreas Solberg for talking me into
doing this, and the funding from GEANT2. Stefan as well as Kolbjørn
Barmen, Ralf Paffrath and Maja Wolniewicz have helped with early
testing of the code.
Thanks for contributing code goes to Arne Schwabe, Maja Wolniewicz,
Simon Leinen and Stefan Winter.
All of the above plus Milan Sova have provided good feedback on
several implementation choices. Finally thanks to Hans Zandbelt
for providing the autoconf stuff. I may have forgotten someone,
let me know if you feel left out.
For more information, feedback etc. please see the information
at http://software.uninett.no/radsecproxy/
Stig Venaas <venaas@uninett.no> -- 2009.07.22
Thanks to Stefan Winter and Andreas Solberg for talking me into doing
this, and the funding from GEANT2. Stefan as well as Kolbjørn Barmen,
Ralf Paffrath and Maja Wolniewicz have helped with early testing of
the code.
Thanks for contributing code goes to Arne Schwabe, Maja Wolniewicz,
Simon Leinen and Stefan Winter.
All of the above plus Milan Sova have provided good feedback on
several implementation choices. Finally thanks to Hans Zandbelt for
providing the autoconf stuff. I may have forgotten someone, let me
know if you feel left out.
For more information, feedback etc. please see the information at
http://software.uninett.no/radsecproxy/
Stig Venaas <venaas@uninett.no> -- 2009.07.22
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment