Videreutvikling UNINETT

blant annet mtp multicast

DOC/example.cfg

@@ -22,10 +22,20 @@ START NOW
 ##   1000 packets/second with 1000 bytes/packet = 1000kbytes/sec
 ##
 ## 1 second from that the flow is turned off...
-##
-1000 0030 ON 3002 10.1.1.1:10001 CONSTANT 200 250
-3000 0030 MODIFY CONSTANT 400 500
-4000 0030 MODIFY CONSTANT 1000 1000
+
+1000 0030 ON 1030 192.168.1.1:1031 CONSTANT 200 250
+#2000 0030 MODIFY CONSTANT 400 500
+#4000 0030 MODIFY CONSTANT 1000 1000
+
+# IPv4 multicast address
+#1000 0030 ON 1030 224.0.2.123:1031 CONSTANT 10 256
+
+# IPv6 unicast address
+#1000 0030 ON 1030 2001:718:1:b:21f:d0ff:feae:64b2:1031 CONSTANT 10 512
+
+# ipv6 multicast address
+#1000 0030 ON 1030 FF3E:040:2001:718:2:981:ACAC:ACCA:1031 CONSTANT 10 1024
+
 5000 0030 OFF
 
 ## FLOW 2: (flow ID = 25)
@@ -36,16 +46,16 @@ START NOW
 ## Sets the TOS for this flow to LOW_DELAY (0x10)
 ##
 ## 9 seconds after that the flow is turned off...
-##
-0000 0025 ON 3001 10.1.1.1:10001 CONSTANT 400 100
-TOS 0025 0x10
-9000 0025 OFF
+#
+#0000 0025 ON 1025 hostname.domain.com:1026 CONSTANT 400 100
+#TOS 0025 0x10
+#9000 0025 OFF
 
 ## FLOW 3: (flow ID = 1)
 ##
 ## This flow acts as specified in the TRACE configuration file.
 ## Read the README.rude file for the command and file syntax
 ##
-0000 1 ON 3111 10.1.1.1:10001 TRACE trace_file.txt
-9999 1 OFF
+#0000 1 ON 1001 10.1.1.1:1002 TRACE trace_file.txt
+#9999 1 OFF
 ## ... and that's it.

Makefile

+# Generated automatically from Makefile.in by configure.
+# $Id: Makefile.in,v 1.1 2005/05/31 07:12:38 ubik Exp $
+#
+# autoconf/Makefile.in - the main Makefile template for RUDE and CRUDE
+#
+# Authors: Juha Laine     <james@cs.tut.fi>
+#	   Sampo Saaristo <sambo@cc.tut.fi>
+#
+# Copyright (C) 1999 Juha Laine, Tampere, Finland
+#                    All rights reserved
+#
+##############################################################################
+SHELL   = /bin/sh
+SUBDIRS = rude crude
+
+
+all:
+	@for i in $(SUBDIRS); do \
+		(cd $$i && $(MAKE) all) \
+	done
+
+clean:
+	rm -f *~ config.cache config.log config.status
+	@for i in $(SUBDIRS); do \
+		(cd $$i && $(MAKE) clean) \
+	done
+
+distclean:
+	rm -f *~ config.cache config.log config.status configure Makefile
+	rm -f doc/*~ autoconf/config.hin include/config.h include/stamp.h
+	@for i in $(SUBDIRS); do \
+		(cd $$i && $(MAKE) distclean) \
+	done
+
+rude:
+	cd rude && $(MAKE) all
+
+crude:
+	cd crude && $(MAKE) all
+
+install:
+	@for i in $(SUBDIRS); do \
+		(cd $$i && $(MAKE) install) \
+	done
+
+##############################################################################
+# Rules for autoconfiguration file REmaking
+##############################################################################
+update: include/stamp.h
+
+include/stamp.h: autoconf/config.hin configure autoconf/Makefile.in rude/Makefile.in crude/Makefile.in
+	./configure
+
+autoconf/config.hin: autoconf/acconfig.h
+	@autoheader -l ./autoconf
+	@touch autoconf/config.hin
+	@echo "****************************"
+	@echo "* header templates updated *"
+	@echo "****************************"
+
+configure: autoconf/configure.in
+	rm -f config.*
+	@autoconf autoconf/configure.in > configure; chmod 755 configure
+	@echo "****************************"
+	@echo "* configure script updated *"
+	@echo "****************************"
+
+##############################################################################

autoconf/Makefile.in

-# $Id$
+# $Id: Makefile.in,v 1.1 2005/05/31 07:12:38 ubik Exp $
 #
 # autoconf/Makefile.in - the main Makefile template for RUDE and CRUDE
 #

autoconf/config.hin

+/* autoconf/config.hin.  Generated automatically from configure.in by autoheader 2.13.  */
+/***************************************************************************
+ * autoconfig/acconfig.h                                                   *
+ *  - is the template file for autoconfig/config.hin which is generated    *
+ *    by the autoheader command                                            *
+ *                                                                         *
+ * autoconfig/config.hin                                                   *
+ *  - is the template for include/config.h, that will be gererated by      *
+ *    the ./configure script                                               *
+ *                                                                         *
+ * include/config.h                                                        *
+ *  - is the file that has the definitions/options for the pre-processor   *
+ *                                                                         *
+ ***************************************************************************/
+
+/* Define to empty if the keyword does not work.  */
+#undef const
+
+/* Define to `int' if <sys/types.h> doesn't define.  */
+#undef gid_t
+
+/* Define if you have <sys/wait.h> that is POSIX.1 compatible.  */
+#undef HAVE_SYS_WAIT_H
+
+/* Define if you need to in order for stat and other things to work.  */
+#undef _POSIX_SOURCE
+
+/* Define if you have the ANSI C header files.  */
+#undef STDC_HEADERS
+
+/* Define if you can safely include both <sys/time.h> and <time.h>.  */
+#undef TIME_WITH_SYS_TIME
+
+/* Define if your <sys/time.h> declares struct tm.  */
+#undef TM_IN_SYS_TIME
+
+/* Define to `int' if <sys/types.h> doesn't define.  */
+#undef uid_t
+
+/* Define if you have the gettimeofday function.  */
+#undef HAVE_GETTIMEOFDAY
+
+/* Define if you have the munlockall function.  */
+#undef HAVE_MUNLOCKALL
+
+/* Define if you have the select function.  */
+#undef HAVE_SELECT
+
+/* Define if you have the sigaction function.  */
+#undef HAVE_SIGACTION
+
+/* Define if you have the strerror function.  */
+#undef HAVE_STRERROR
+
+/* Define if you have the <signal.h> header file.  */
+#undef HAVE_SIGNAL_H
+
+/* Define if you have the <sys/time.h> header file.  */
+#undef HAVE_SYS_TIME_H
+
+/* Define if you have the <unistd.h> header file.  */
+#undef HAVE_UNISTD_H
+
+/* Amount of DEBUGGING output */
+#undef DEBUG
+
+/* End of file */

autoconf/configure.in

-# $Id$
+# $Id: configure.in,v 1.1 2005/05/31 07:12:38 ubik Exp $
 #
 # autoconf/configure.in for RUDE and CRUDE
 #

crude/Makefile

+# Generated automatically from Makefile.in by configure.
+# $Id: Makefile.in,v 1.2 2005/06/30 12:02:49 juranek Exp $
+#
+# Makefile.in for CRUDE
+#
+# Authors: Juha Laine     <james@cs.tut.fi>
+#	   Sampo Saaristo <sambo@cc.tut.fi>
+#
+# Copyright (C) 1999 Juha Laine, Tampere, Finland
+#                    All rights reserved
+#
+##############################################################################
+SHELL = /bin/sh
+
+prefix        = /usr/local
+exec_prefix   = ${prefix}
+
+bindir        = ${exec_prefix}/bin
+mandir        = ${prefix}/man/man8
+sbindir       = ${exec_prefix}/sbin
+srcdir        = .
+
+INSTALL  = /usr/bin/install -c -o root -g root -m 0755
+
+CC       = gcc
+CFLAGS   =  -O2 -I../include
+LDFLAGS  = 
+DEFS     = -DHAVE_CONFIG_H
+LIBS     = -lm 
+MAN8     = crude.8
+
+CRUDE_OBJS = main.o ../rude/mcast.o
+
+##############################################################################
+# Rules for make
+##############################################################################
+.c.o:
+	$(CC) $(CFLAGS) $(DEFS) -c -o $*.o $<
+
+all:	crude
+
+crude:	$(CRUDE_OBJS)
+	$(CC) $(CFLAGS) $(LIBS) $(DEFS) $(LDFLAGS) -o crude $(CRUDE_OBJS)
+
+clean:
+	rm -f *~ *.o crude
+
+distclean:
+	rm -f *~ *.o crude Makefile
+
+install: crude
+	@if [ ! -d $(bindir) ]; then mkdir -m 0755 $(bindir); fi;
+	$(INSTALL) crude $(bindir)
+	@if [ ! -d $(mandir) ]; then mkdir -m 0755 $(mandir); fi;
+	$(INSTALL) crude.8 $(mandir)
+##############################################################################

crude/Makefile.in

-# $Id$
+# $Id: Makefile.in,v 1.2 2005/06/30 12:02:49 juranek Exp $
 #
 # Makefile.in for CRUDE
 #
@@ -29,7 +29,7 @@ DEFS     = @DEFS@
 LIBS     = @LIBS@
 MAN8     = crude.8
 
-CRUDE_OBJS = main.o
+CRUDE_OBJS = main.o ../rude/mcast.o
 
 ##############################################################################
 # Rules for make

include/config.h

+/* include/config.h.  Generated automatically by configure.  */
+/* autoconf/config.hin.  Generated automatically from configure.in by autoheader 2.13.  */
+/***************************************************************************
+ * autoconfig/acconfig.h                                                   *
+ *  - is the template file for autoconfig/config.hin which is generated    *
+ *    by the autoheader command                                            *
+ *                                                                         *
+ * autoconfig/config.hin                                                   *
+ *  - is the template for include/config.h, that will be gererated by      *
+ *    the ./configure script                                               *
+ *                                                                         *
+ * include/config.h                                                        *
+ *  - is the file that has the definitions/options for the pre-processor   *
+ *                                                                         *
+ ***************************************************************************/
+
+/* Define to empty if the keyword does not work.  */
+/* #undef const */
+
+/* Define to `int' if <sys/types.h> doesn't define.  */
+/* #undef gid_t */
+
+/* Define if you have <sys/wait.h> that is POSIX.1 compatible.  */
+#define HAVE_SYS_WAIT_H 1
+
+/* Define if you need to in order for stat and other things to work.  */
+/* #undef _POSIX_SOURCE */
+
+/* Define if you have the ANSI C header files.  */
+#define STDC_HEADERS 1
+
+/* Define if you can safely include both <sys/time.h> and <time.h>.  */
+#define TIME_WITH_SYS_TIME 1
+
+/* Define if your <sys/time.h> declares struct tm.  */
+/* #undef TM_IN_SYS_TIME */
+
+/* Define to `int' if <sys/types.h> doesn't define.  */
+/* #undef uid_t */
+
+/* Define if you have the gettimeofday function.  */
+#define HAVE_GETTIMEOFDAY 1
+
+/* Define if you have the munlockall function.  */
+#define HAVE_MUNLOCKALL 1
+
+/* Define if you have the select function.  */
+#define HAVE_SELECT 1
+
+/* Define if you have the sigaction function.  */
+#define HAVE_SIGACTION 1
+
+/* Define if you have the strerror function.  */
+#define HAVE_STRERROR 1
+
+/* Define if you have the <signal.h> header file.  */
+#define HAVE_SIGNAL_H 1
+
+/* Define if you have the <sys/time.h> header file.  */
+#define HAVE_SYS_TIME_H 1
+
+/* Define if you have the <unistd.h> header file.  */
+#define HAVE_UNISTD_H 1
+
+/* Amount of DEBUGGING output */
+/* #undef DEBUG */
+
+/* End of file */

include/mcast.c

+/*
+*  C Implementation: %{$MODULE}
+*
+* Description:
+*
+*
+*
+* Copyright: See COPYING file that comes with this distribution
+*
+*/
+#include <mcast.h>
+#include <rude.h>
+
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <netdb.h>
+#include <stdio.h>
+#include <errno.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <time.h>
+#include <net/if.h>
+#include <sys/ioctl.h>
+
+int
+isMulticastAddr(struct sockaddr_storage *addr)
+{
+    int retVal;
+
+    retVal=-1;
+		
+    switch (addr->ss_family) {
+        case AF_INET: {
+            struct sockaddr_in *addr4=(struct sockaddr_in *)addr;
+            retVal = IN_MULTICAST(ntohl(addr4->sin_addr.s_addr));
+        } break;
+
+        case AF_INET6: {
+            struct sockaddr_in6 *addr6=(struct sockaddr_in6 *)addr;
+ 					retVal = IN6_IS_ADDR_MULTICAST(&addr6->sin6_addr);
+        } break;
+
+        default:
+           ;
+    }
+
+    return retVal;
+} 
+
+
+
+
+int joinGroup(int sockfd, int loopBack, unsigned int mcastTTL,struct sockaddr_storage *addr,int interface)
+{
+    int r1, r2, r3, retval;
+
+    retval=-1;
+    switch (addr->ss_family) {
+        case AF_INET: {
+		        struct ip_mreq      mreq;
+			//zjistit adresu interfacu(v parametru je jeho index),INADDR_ANY je pro defaultni
+            mreq.imr_multiaddr.s_addr=
+                ((struct sockaddr_in *)addr)->sin_addr.s_addr;
+			if(interface < 0){
+            	mreq.imr_interface.s_addr= INADDR_ANY;
+				RUDEBUG7("joinGroup: using inaddr_any interface\n");
+			}
+			else{
+				struct ifreq ifr;
+				char name[IF_NAMESIZE];
+				RUDEBUG7("joinGroup: using interface %i\n",interface);
+				if(!if_indextoname(interface,name)){
+					RUDEBUG1("joinGroup: interface doesnt exist.\n");
+					return retval;
+				}
+				
+				strcpy(ifr.ifr_name, name);
+				if(ioctl(sockfd,SIOCGIFADDR,&ifr)==-1){
+					RUDEBUG1("joinGroup() - ioctl failed for getting interface address: %s\n",strerror(errno));
+					return retval;
+				}
+				struct sockaddr_in *si = (struct sockaddr_in*)&ifr.ifr_addr;
+				RUDEBUG7("joinGroup(): interface address: %s\n",inet_ntoa(si->sin_addr));
+				//mreq.imr_interface.s_addr = si->sin_addr.s_addr;
+				memcpy(&mreq.imr_interface,&(si->sin_addr),sizeof(struct in_addr));
+				
+				//mreq.imr_interface = si->sin_addr;
+			}
+
+            r1= setsockopt(sockfd, IPPROTO_IP, IP_MULTICAST_LOOP,
+                           &loopBack, sizeof(loopBack));
+            if (r1<0)
+                RUDEBUG1("joinGroup:: IP_MULTICAST_LOOP:: ");
+
+            r2= setsockopt(sockfd, IPPROTO_IP, IP_MULTICAST_TTL,
+                           &mcastTTL, sizeof(mcastTTL));
+            if (r2<0)
+               RUDEBUG1("joinGroup:: IP_MULTICAST_TTL:: ");
+
+            r3= setsockopt(sockfd, IPPROTO_IP, IP_ADD_MEMBERSHIP,
+                           (const void *)&mreq, sizeof(mreq));
+            if (r3<0)
+                RUDEBUG1("joinGroup:: IP_ADD_MEMBERSHIP:: ");
+
+        } break;
+
+        case AF_INET6: {
+           struct ipv6_mreq    mreq6;
+
+           memcpy(&mreq6.ipv6mr_multiaddr,
+                  &(((struct sockaddr_in6 *)addr)->sin6_addr),
+                  sizeof(struct in6_addr));
+			
+		   if(interface < 0){
+            	mreq6.ipv6mr_interface= 0;
+				RUDEBUG7("joinGroup: using default interface\n");
+		   }else{
+            	mreq6.ipv6mr_interface= interface;
+				RUDEBUG7("joinGroup: using interface with index: %d\n",interface);
+		   }			   
+            
+
+	   	   r1= setsockopt(sockfd, IPPROTO_IPV6, IPV6_MULTICAST_LOOP, 
+                          &loopBack, sizeof(loopBack));
+           if (r1<0)
+               RUDEBUG1("joinGroup(): IPV6_MULTICAST_LOOP error");
+
+           r2= setsockopt(sockfd, IPPROTO_IPV6, IPV6_MULTICAST_HOPS, 
+                          &mcastTTL, sizeof(mcastTTL));
+           if (r2<0)
+               RUDEBUG1("joinGroup() IPV6_MULTICAST_HOPS error  ");
+
+		   r3=setsockopt(sockfd,IPPROTO_IPV6,IPV6_JOIN_GROUP,&mreq6,sizeof(mreq6));
+			//r3=setsockopt(sockfd,IPPROTO_IPV6,IP_ADD_MEMBERSHIP,&mreq6,sizeof(mreq6));		   
+			 if (r3<0)
+              RUDEBUG1("joinGroup() IPV6_JOIN_GROUP error ");
+
+        } break;
+
+        default:
+            r1=r2=r3=-1;
+    }
+
+    if ((r1>=0) && (r2>=0) && (r3>=0))
+        retval=0;
+
+    return retval;
+}

include/mcast.h

+//
+// C++ Interface: %{MODULE}
+//
+// Description: 
+//
+//
+// Author: %{AUTHOR} <%{EMAIL}>, (C) %{YEAR}
+//
+// Copyright: See COPYING file that comes with this distribution
+//
+//
+
+#include <netinet/in.h>  /* for struct sockaddr_in */
+
+int isMulticastAddr(struct sockaddr_storage *addr);
+int joinGroup(int sockfd, int loopBack, unsigned int mcastTTL,struct sockaddr_storage *addr,int interface);

include/rude.h

@@ -29,11 +29,14 @@
 
 #define DNMAXLEN 128
 #define TMAXLEN  32
-#define PMINSIZE 20     /* Minimum accepted UDP-data field/packet size      */
+#define PMINSIZE 24     /* Minimum accepted UDP-data field/packet size, in previouse version it was 20      */
+#define PMINSIZE_V6 40	/* Minimum accepted UDP-data field/packet size for ipv6      */
 #define PMAXSIZE 32768  /* Maximum accepted UDP-data field/packet size      */
 #define MINDURAT 0.001  /* Minimum allowed flow duration in seconds (float) */
 
-#define VERSION "0.62"
+#define DEBUG 5
+
+#define VERSION "0.7-multicast"
 
 /*
  * Enumeration definition for different (known) flow types
@@ -51,8 +54,10 @@ typedef enum {
  */
 struct cbr_params{
   f_type ftype;                        /* Flow TRAFFIC TYPE              */
-  int    rate;                         /* Flow PACKET RATE (per second)  */
+  int    rate;                         /* Flow PACKET RATE - PACKAGE RATE per PERIOD */
   int    psize;                        /* Flow PACKET SIZE               */
+  int 	 package_size;				   /* Flow NUMBER OF PACKETS IN ONE PACKAGE*/
+  int    time_period;					   /* Flow TIME_PERIOD */		
 };
 
 /*
@@ -76,16 +81,17 @@ struct trace_params{
  * The main building block for flows
  */
 struct flow_cfg {
-  struct flow_cfg    *next;            /* Pointer to NEXT flow           */
-  struct flow_cfg    *mod_flow;        /* Next action-block for the flow */
-  struct sockaddr_in dst;              /* Destination information        */
-  int                send_sock;	       /* Socket to be used by this flow */
-
-  long int           flow_id;          /* Flow IDENTIFICATION number     */
-  unsigned short     flow_sport;       /* Flow SOURCE PORT number        */
-  struct timeval     flow_start;       /* Absolute flow cmd START TIME   */
-  struct timeval     flow_stop;        /* Absolute flow cmd END TIME     */
-  struct timeval     next_tx;          /* Absolute next packet TX TIME   */
+  struct flow_cfg     *next;            /* Pointer to NEXT flow           */
+  struct flow_cfg     *mod_flow;        /* Next action-block for the flow */
+  struct sockaddr_storage dst;              /* Destination information        */
+  int                 send_sock;	       /* Socket to be used by this flow */
+
+	
+  long int            flow_id;          /* Flow IDENTIFICATION number     */
+  unsigned short      flow_sport;       /* Flow SOURCE PORT number        */
+  struct timeval      flow_start;       /* Absolute flow cmd START TIME   */
+  struct timeval      flow_stop;        /* Absolute flow cmd END TIME     */
+  struct timeval      next_tx;          /* Absolute next packet TX TIME   */
 
   void (*send_func)(struct flow_cfg*); /* TX function for this flow */
 
@@ -94,7 +100,8 @@ struct flow_cfg {
   int sequence_nmbr;                   /*                   */
 
   int tos;                             /* IP TOS byte if positive */
-
+  char 				*localIf;			/* local interface to be used with multicast */	
+  char prefferedVersion; 				/*preffered ip version(4 or 6)*/
   union {
     f_type              ftype;
     struct cbr_params   cbr;
@@ -111,7 +118,7 @@ struct udp_data{
   unsigned long tx_time_seconds; 
   unsigned long tx_time_useconds; 
   unsigned long flow_id;
-  unsigned long dest_addr;
+  struct sockaddr_storage dest_addr;
 }__attribute__ ((packed));
 
 
@@ -121,9 +128,10 @@ struct udp_data{
 struct crude_struct{
   unsigned long  rx_time_seconds;
   unsigned long  rx_time_useconds;
-  unsigned long  src_addr;
+  //struct in6_addr  src_addr;
   long           pkt_size;
-  unsigned short src_port;
+  struct sockaddr_storage src; 
+	//unsigned short src_port;
   unsigned short dest_port;
 };
 
@@ -157,4 +165,17 @@ struct crude_struct{
   } while (0)
 #endif
 
+#ifndef timespecsub
+  #define	timespecsub(tsp, usp, vsp)					\
+	do {								\
+		(vsp)->tv_sec = (tsp)->tv_sec - (usp)->tv_sec;		\
+		(vsp)->tv_nsec = (tsp)->tv_nsec - (usp)->tv_nsec;	\
+		if ((vsp)->tv_nsec < 0) {				\
+			(vsp)->tv_sec--;				\
+			(vsp)->tv_nsec += 1000000000L;			\
+		}							\
+	} while (0)
+#endif
+  
+  
 #endif /* _RUDE_H */

include/stamp.h

+timestamp

rude/Makefile

+# Generated automatically from Makefile.in by configure.
+# $Id: Makefile.in,v 1.2 2005/06/30 12:02:49 juranek Exp $
+#
+# Makefile.in for RUDE
+#
+# Authors: Juha Laine     <james@cs.tut.fi>
+#	   Sampo Saaristo <sambo@cc.tut.fi>
+#
+# Copyright (C) 1999 Juha Laine, Tampere, Finland
+#                    All rights reserved
+#
+##############################################################################
+SHELL = /bin/sh
+
+prefix        = /usr/local
+exec_prefix   = ${prefix}
+
+bindir        = ${exec_prefix}/bin
+mandir        = ${prefix}/man/man8
+sbindir       = ${exec_prefix}/sbin
+srcdir        = .
+
+INSTALL  = /usr/bin/install -c -o root -g root -m 0755
+
+CC       = gcc
+CFLAGS   =  -O2 -I../include
+LDFLAGS  = 
+DEFS     = -DHAVE_CONFIG_H
+LIBS     = -lm 
+MAN8     = rude.8
+
+RUDE_OBJS = flow_cntl.o flow_txmit.o main.o parse.o mcast.o
+
+##############################################################################
+# Rules for make
+##############################################################################
+.c.o:
+	$(CC) $(CFLAGS) $(DEFS) -c -o $*.o $<
+
+all:	rude
+
+rude:	$(RUDE_OBJS)
+	$(CC) $(CFLAGS) $(LIBS) $(DEFS) $(LDFLAGS) -o rude $(RUDE_OBJS)
+
+clean:
+	rm -f *~ *.o rude
+
+distclean:
+	rm -f *~ *.o rude Makefile
+
+install: rude
+	@if [ ! -d $(bindir) ]; then mkdir -m 0755 $(bindir); fi;
+	$(INSTALL) rude $(bindir)
+	@if [ ! -d $(mandir) ]; then mkdir -m 0755 $(mandir); fi;
+	$(INSTALL) rude.8 $(mandir)
+ 
+
+##############################################################################

rude/Makefile.in

-# $Id$
+# $Id: Makefile.in,v 1.2 2005/06/30 12:02:49 juranek Exp $
 #
 # Makefile.in for RUDE
 #
@@ -29,7 +29,7 @@ DEFS     = @DEFS@
 LIBS     = @LIBS@
 MAN8     = rude.8
 
-RUDE_OBJS = flow_cntl.o flow_txmit.o main.o parse.o
+RUDE_OBJS = flow_cntl.o flow_txmit.o main.o parse.o mcast.o
 
 ##############################################################################
 # Rules for make

rude/flow_txmit.c

@@ -43,13 +43,25 @@ extern struct flow_cfg *head;
 extern struct udp_data *data;
 extern char            *buffer;
 
-
+struct timespec pre_nano_sleep = {0,10005};//10us+5nanos...see man nanosleep 
 /*
  * wait_for_xmit(): Wait for certain period of time in busy-loop
  */
 __inline__ void wait_for_xmit(struct timeval *target, struct timeval *now)
 {
-  while(1){
+    //try wait with nanosleep, then active loop
+	gettimeofday(now,NULL);
+    if(timercmp(now,target,<)){
+		//nanosleep has a resolution 10ms on i386 architectures
+		struct timespec now_spec = {now->tv_sec,now->tv_usec*1000};
+		struct timespec target_spec = {target->tv_sec,target->tv_usec*1000};
+		struct timespec diff;
+		timespecsub(&target_spec,&now_spec,&diff);    //dif = now-target - pre_nano_sleep
+		timespecsub(&diff, &pre_nano_sleep, &diff);		
+		if(diff.tv_sec >= 0 && diff.tv_nsec >= 0)
+			nanosleep(&diff, NULL);
+	}
+	while(1){
     gettimeofday(now,NULL);
     if(timercmp(now,target,<)){
       /* FIXME: check if the timegap is large => use [u | nano]sleep() */
@@ -71,9 +83,11 @@ void send_cbr(struct flow_cfg *flow)
   struct cbr_params *p = &flow->params.cbr;
   struct timeval now   = {0,0};
   int written          = 0;
+  int i = 0;
 
   /* Do the initialization and wait if necessary */
-  data->dest_addr       = flow->dst.sin_addr.s_addr;
+  data->dest_addr       = flow->dst;
+  //printf("size: %d\n",sizeof(flow->dst));
   data->flow_id         = htonl(flow->flow_id);
   data->sequence_number = htonl(flow->sequence_nmbr);
   wait_for_xmit(&flow->next_tx, &now);
@@ -84,20 +98,34 @@ void send_cbr(struct flow_cfg *flow)
 
   /* Write the data to the socket and check the result for errors */
   /* Increase the status and sequence number counters.            */
-  written = sendto(flow->send_sock, buffer, p->psize, 0,
-		   (struct sockaddr *)&flow->dst,sizeof(struct sockaddr));
-  if(written != p->psize){
-    flow->errors++;
-    RUDEBUG7("send_cbr(): sendto() error for flow=%ld (%d/%d): %s\n",
-	     flow->flow_id,written,p->psize,strerror(errno));
-  } else {
-    flow->success++;
+  /* Write whole package - package_size * one packet			  */
+  for( i = 0; i < p -> package_size; i++){
+	  //pokud budu posilat jeste dalsi v baliku tak bych mohl zvysit sequence number
+	  if( i > 0){
+		 data->sequence_number = htonl( ++(flow->sequence_nmbr) );
+		  gettimeofday(&now,NULL);
+		  /* ...and fill in the actual times */
+		  data->tx_time_seconds  = htonl(now.tv_sec);
+		  data->tx_time_useconds = htonl(now.tv_usec);
+		  
+	  }
+		  
+	  written = sendto(flow->send_sock,